Measuring

A metal tape measure is recommended for accuracy. Only 2 measurements are required:

LENGTH - measure between where you want the top and bottom to be. The top of the blind is attached to a 2x2 cm wood batten.

WIDTH - The blind may be wide enough to cover the whole frame or narrower leaving the frame exposed.

If the window is recessed, you can position the blind inside the recess, near the glass, or outside the recess as illustrated. If outside the recess, make the blind width about 3 or 4 cm wider than the window on each side.

Take care that there are no objects to obstruct the smooth operation of the blind. Window levers and wall tiles can sometimes cause an obstruction to blinds inside a recess

Bay windows: There should be a gap of at least 6cm between the blinds, in the corners of the bay.

Printable Brochure : Click

Please do not hesitate to call for a quote with any queries : 01428 648 326 Email: Click